Alcatel-Lucent 8950 AAA - Displaying the RADIUS Server Administration Interface

............................................................................................................................................................................................................................................................
Displaying the RADIUS Server Administration InterfaceSupplementary Information
A-2
365-360-001 R6.0
Issue 1, December 2008
............................................................................................................................................................................................................................................................
Figure A-1 Built-in Web Interface
Displaying the RADIUS Server Administration Interface
About RADIUS Server Administration Interface
Use the following procedure to display the RADIUS server Admin interface:
1. Using the IP address of the 8950 AAA server, open a Telnet window using the
following command:
telnet IP address 9023
Result:
A Telnet screen appears.
2. Using the administrator username and password, enter the following command:
login username password
3. At the prompt, enter help to display a list of commands for the RADIUS server that
may be used through this interface. Figure A-2 shows such a telnet session.