8950 AAA Operators PanelConfiguring 8950 AAA Operators
............................................................................................................................................................................................................................................................
365-360-001R6.0
Issue 1, December 2008
11-9
............................................................................................................................................................................................................................................................
RADIUS Authentication
In addition to storing users in the Operators file, you can authenticate users using a
RADIUS server. To enable RADIUS authentication, you must specify an address and
secret of the RADIUS server. The RADIUS Authentication tab panel allows you to do
this.
In the 8950 AAA Operators Panel, Figure 11-2, click on the RADIUS Authentication
tab. The 8950 AAA Operators–RADIUS Authentication tab panel is displayed as shown
in Figure 11-7.
Local MIB Access Allowing the user with Read only mode or giving him
permission to use any mode.
Table 11-4 SNMP V3 User Properties–User Properties Tab
Field Description
To Next Page
Loading...