Alcatel-Lucent 8950 AAA - Page 395

How to Configure for a TLS Demo Out of the Box8950 AAA Certificate Manager
............................................................................................................................................................................................................................................................
365-360-001R6.0
Issue 1, December 2008
22-27
............................................................................................................................................................................................................................................................
Message-Authenticator = "84752505CFB9AE3678B6013BDFDE3F32"
State = "4"
Session-Timeout = 180
EAP-Message = "Request/EAP-TLS(5): flags=00() "
Xmit: Access-Request
User-Name = "steve"
NAS-IP-Address = 127.0.0.1
NAS-Port = 1
Message-Authenticator = "00000000000000000000000000000000"
EAP-Message = "Response/EAP-TLS(5): flags=00()
frag.length=644"
State = "4"
Packet authenticator is valid
Recv: Access-Challenge after 331 ms.
Message-Authenticator = "136C3CE06532EB5D3787339DADEB32DC"
State = "5"
Session-Timeout = 180
EAP-Message = "Request/EAP-TLS(6): flags=80(L)
msg.length=51frag.length=51"
Sending a 51 byte message to the EAP TLS client:
ChangeCipherSpec,v3.1
Handshake,v3.1
Finished
Handshake Complete:
Cipher suite = SSL_RSA_WITH_3DES_EDE_CBC_SHA
Session ID =
id:46:173:2D7:F5:25:29:6F:CAC0:84:4D7:01Acking TLS
fragment
Xmit: Access-Request
User-Name = "steve"
NAS-IP-Address = 127.0.0.1
NAS-Port = 1
Message-Authenticator = "00000000000000000000000000000000"
EAP-Message = "Response/EAP-TLS(6): flags=00()"
State = "5"
Packet authenticator is valid
Recv: Access-Accept after 80 ms.
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-IP-Address = 192.168.10.6