List of Server CommandsServer Diagnostics and Control Commands
............................................................................................................................................................................................................................................................
365-360-001R6.0
Issue 1, December 2008
24-25
............................................................................................................................................................................................................................................................
system version
Description: Displays output OS version.
Command Format: system version
There are no arguments for this command.
tacacsplus clients
This command displays a list TACACS+ clients
Command Format: system [PROPERTY]
There are no arguments for this command.
uss
The following section lists the Universal State Server (USS) commands and their
arguments:
uss counts
Description: Displays output counter information.
Command Format: uss counts [<counter> [<attribute>]
uss entry
Description: Lists a state database entry.
Command Format: uss entry <key> [key | mod |ev |state |complete |
attrs]
[<counter>
[<attribute>=]
The name of the counter from which
information is retrieved.
<key> The IP address and port of the entry to
retrieve.
[key | mod |ev |state
|complete | attrs]
Specifies the field to get out of the database
entry.
If [
key] is specified, as state entry key,
all entries will be listed. However, if key and
any other entry (
mod, ev, state,
compete, attrs
) is specified, only that
entry would be listed. For example:
state
entry [key | mod |
would list only the
mod entries.
To Next Page
Loading...