............................................................................................................................................................................................................................................................
List of Server CommandsServer Diagnostics and Control Commands
24-28
365-360-001R6.0
Issue 1, December 2008
............................................................................................................................................................................................................................................................
Command Format: uss stop key <key>
uss stop nas
Description: Stops all entries for a NAS.
Command Format: uss stop nas
There are no arguments for this command.
uss2 entry dump
Description: Displays selected or all data from one or all the entries.
Command Format: uss2 entry dump <model> [<key>]
[<key|naskey|state|sessionid|mod|ev|attrs>]
uss2 entry list
Description: Displays entry data from one or all entries.
Command Format:
uss2 entry list <model> [<key>] ]
uss2 load
Description: Reloads session state from the given file.
<key> The key associated with the state entry to be
stopped.
<model> Name of the model
<key> The key associated with the state entry to be
displayed.
<key|naskey|state|ses
sionid|mod|ev|attrs>
Specifies the field to get out of the database
entry.
If [
key] is specified, as state entry key, all
entries will be listed. However, if key and any
other entry (
mod, ev, nas, state,attrs) is
specified, only that entry would be listed. For
example:
state entry [key | mod | would
list only the mod entries.
<model> Name of the model.
<key> The key associated with the state entry to be
displayed.
To Next Page
Loading...