............................................................................................................................................................................................................................................................
Installing the PolicyAssistant and the Policy Flow EditorServer Management Tool Command Set
3-14
365-360-001 R6.0
Issue 1, December 2008
............................................................................................................................................................................................................................................................
Figure 3-10 SMT–Policy Flow Installation page
3. Select Install Policy Assistant and click the Install Policy Flow button. The
following message appears.
Figure 3-11 SMT–Policy Flow Installation warning message
4. Click Yes to continue.
Important! If the Policy Flow Assistant is already installed, the following message
appears.
Figure 3-12 SMT–Policy Flow warning message
5. Click Yes to continue. It will take a few seconds and when the installation is complete,
the following message appears.
To Next Page
Loading...