Performing Basic Configuration Tasks
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
15
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway Getting Started Guide
ACCESSING THE OMNIACCESS 5740 USG THROUGH GUI
Follow the procedure given below to access and configure the OmniAccess 5740
USG through GUI.
Step 1: Open a Web browser from your PC.
Step 2: In the address bar/field, type the IP address of the interface obtained from
the DHCP server and press the Enter key.
Example:
http://<ip address>
http://192.168.1.1
The login page for the Web GUI is displayed in the browser window.
Note: Execute “show ip interface brief” command to view the IP address obtained from the
server.
Step 3: Enter the default user name and password (superadmin/admin, admin),
and press the Enter key.
Step 4: This will launch a web interface to configure your OmniAccess 5740 USG.
For further configuration of your OmniAccess 5740 USG, refer to the
“OmniAccess 5740 Unified Services Gateway Web GUI Users Guide”.
To Next Page
Loading...
Need help?
General
