OmniSwitch Transceivers Guide June 2007 page 1-1
1 Small Form-Factor
Pluggables (SFPs)
OmniSwitch Series switches use both copper-based and fiber-based optical Small Form Factor Pluggable
(SFP) transceivers. SFPs are fully hot-swappable and are available for both short-reach and long-reach
applications. Copper-based and fiber-based optical SFPs can be mixed on the same module.
In This Chapter
This chapter describes the technical specifications for all the OmniSwitch supported SFP transceivers. For
additional details about OmniSwitch modules, see the appropriate OmniSwitch Hardware Guide.
SFP specifications in the chapter include:
• Gigabit Ethernet Transceivers. See “Gigabit Ethernet Transceivers” on page 1-3.
• Dual-Speed Ethernet Transceivers. See “Dual-Speed Ethernet Transceivers” on page 1-6.
• Bi-directional Ethernet Transceivers. See “Bi-directional 100 FX Ethernet Transceivers” on page 1-7.
• 100-FX Ethernet Transceivers. See “100 FX Ethernet Transceivers” on page 1-8.
• CWDM Gigabit Ethernet Transceivers. See “CWDM Gigabit Ethernet Transceivers” on page 1-10.
For information on installing and managing OmniSwitch hardware, see the appropriate Hardware Guide.
For information on OmniSwitch XFP compatibility, see “SFP Compatibility Matrix” on page 3-15.
To Next Page
Loading...
