November 2013 AOS Release 6.4.6.R01 Release Notes
The absorption trap is sent when a trap has been
absorbed at least once.
alaStackMgrDuplicateSlotTrap
6850
6850E
Two or more slots claim to have the same slot
number.
alaStackMgrNeighborChangeTrap
6850
6850E
Indicates whether or not the stack is in loop.
alaStackMgrRoleChangeTrap
6850
6850E
Indicates that a new primary or secondary stack
is elected.
A Learned Port Security (LPS) violation has
occurred.
Indicates that the sending agent has received a
Denial of Service (DoS) attack.
Occurs whenever a binding rule which has been
configured gets violated.
Indicates if power inline port is or is not
delivering power to the a power inline device.
pethPsePortPowerMaintenanceStatus
Indicates the status of the power maintenance
signature for inline power.
Indicates that the power inline usage is above
the threshold.
Indicates that the power inline usage is below
the threshold.
Indicates a state change of the neighbor
relationship.
Indicates a state change of the virtual neighbor
relationship.
This trap is sent to management station(s) when
the HTTP server is under Denial of Service
attack. The HTTP and HTTPS connections are
sampled at a 15 second interval. This trap is
sent every 1 minute while the HTTP server
detects it is under attack.
alaStackMgrDuplicateRoleTrap
6850
6850E
6855
The element identified by alaStack-
MgrSlotNINumber detected the presence of two
elements with the same primary or secondary
role as specified by alaStackMgrChasRole on
alaStackMgrClearedSlotTrap
6850
6850E
The element identified by alaStack-
MgrSlotNINumber will enter the pass through
mode because its operational slot was cleared
Page 22 of 80 OmniSwitch 6850E/6855/9000E—Release 6.4.6.R01