November 2013 AOS Release 6.4.6.R01 Release Notes
ARP request for new nexthops.
This trap is sent when the RIP database reaches
the supported maximum number of entries.
When the maximum number is reached, RIP
discards any new updates.
ripngRouteMaxLimitReached
This trap is sent when the RIPng database
reaches the supported maximum number of
entries. When the maximum number is reached,
RIPng discards any new updates.
This trap is sent when the HIC server is down.
This trap is sent when the ERP Ring State has
changed from “Idle” to “Protection”.
This trap is sent when multiple RPLs are
detected in the Ring.
This trap is sent when the Ring is removed
dynamically.
This trap is sent when GVRP recieves a
registration for a VLAN that is configured for
This trap is sent when the stack topology
changes.
This trap is sent when a local or remote
threshold crossing event is detected. A local
threshold crossing event is detected by the local
entity, while a remote threshold crossing event
is detected by the reception of an Ethernet OAM
Event Notification OAMPDU that indicates a
threshold event.
This trap is sent when a local or remote non-
threshold crossing event is detected. A local
event is detected by the local entity, while a
remote event is detected by the reception of an
Ethernet OAM Event Notification OAMPDU
that indicates a non-threshold crossing event.
alaDot3OamThresholdEventClear
This trap is sent when is sent when a local or
remote threshold crossing event is recovered.
alaDot3OamNonThresholdEventClear
This trap is sent is sent when a local or remote
non-threshold crossing event is recovered.
This trap is generated when the maximum
number of peer and client associations config-
ured for the switch is exceeded.
This trap is sent when the value of
aluLicenseTimeRemaining becomes 0 (zero) for
a demo licensed application. This notification is
Page 26 of 80 OmniSwitch 6850E/6855/9000E—Release 6.4.6.R01
To Next Page
Loading...
