November 2013 AOS Release 6.4.6.R01 Release Notes
ddmTemperatureThresholdViolated
This trap is sent when an SFP/ XFP/SFP+
temperature has crossed any threshold or
reverted from previous threshold violation for a
port represented by ifIndex. It also provides the
current realtime value of SFP/ XFP/SFP+
ddmVoltageThresholdViolated
This trap is sent when SFP/XFP/ SFP+ supply
voltage has crossed any threshold or reverted
from previous threshold violation for a port
represented by ifIndex. It also provides the
current realtime value of SFP/XFP/SFP+ supply
ddmCurrentThresholdViolated
This trap is sent when if an SFP/ XFP/SFP+ Tx
bias current has crossed any threshold or
reverted from previous threshold violation for a
port represented by ifIndex. It also provides the
current realtime value of SFP/XFP/SFP+ Tx
ddmTxPowerThresholdViolated
This trap is sent when an SFP/ XFP/SFP+ Tx
output power has crossed any threshold or
reverted from previous threshold violation for a
port represented by ifIndex. It also provides the
current realtime value of SFP/XFP/SFP+ Tx
ddmRxPowerThresholdViolated
This trap is sent when an SFP/ XFP/SFP+ Rx
optical power has crossed any threshold or
reverted from previous threshold violation for a
port represented by ifIndex. It also provides the
current realtime value of SFP/XFP/SFP+ Rx
optical power.
alaLbdStateChangeToShutdown
This trap is sent when the port state changes to
“shutdown”.
alaLbdStateChangeForClearViolationA
This trap is sent when the port state changes
from “shutdown” due “to clear-violation-all”.
alaLbdStateChangeForAutoRecovery
This trap is sent when the port state changes
from shutdown due to auto-recovery mechanism
pimBsrElectedBSRLostElection
This trap is sent when the current E-BSR loses
an election to a new Candidate-BSR.
pimBsrCandidateBSRWinElection
This trap is sent when a C-BSR wins a BSR
Election.
alaErpRingPortStatusChanged
This trap is sent whenever the ring port status
changes.
This trap is sent when given port of the link
aggregation goes to reserved state.
esmViolationRecoveryTimeout
This trap is sent when a user port is re-enabled
after an esm viola-tion recovery timeout.
Page 28 of 80 OmniSwitch 6850E/6855/9000E—Release 6.4.6.R01