What to do if the D04 pump temperature exceeds the limit in my Alcatel Vacuum Technology Adixen ATP 400 HPC?
If the Alcatel Vacuum Technology Water Pump motor temperature exceeds the authorized limit of 85°C, ensure the cooling circuit is functioning correctly. Also, reduce the working pressure or the flow rate. If the problem persists, contact Alcatel Customer Service.
What to do if my Alcatel Vacuum Technology Adixen ATP 400 HPC is overheating (D21)?
If the Alcatel Vacuum Technology Water Pump displays the error 'D21 : PUMP OVERHEAT', verify the pump's cooling system. It might also help to reduce the working pressure or the flow rate.
What to do if the D03 ACT temperature exceeds the limit in my Alcatel Vacuum Technology Water Pump?
If the Alcatel Vacuum Technology Water Pump controller temperature exceeds the authorized limit (70°C for ACT 600T or 75°C for ACT 200T), check that the cooling circuit is operating correctly. For ACT 600T, verify the internal fan; for ACT 200T, check the ventilation.
What to do if my Alcatel Vacuum Technology Adixen ATP 400 HPC Water Pump is too hot (D23)?
If your Alcatel Vacuum Technology Water Pump displays the error 'D23 : HOT PUMP' because the pump temperature exceeds 75°C, first check the pump cooling. Then, reduce the pressure or the flow. Note that if the default is still present, the D21 error appears.
What to do if my Alcatel Vacuum Technology Adixen ATP 400 HPC Water Pump isn’t running?
If your Alcatel Vacuum Technology Water Pump isn’t running or the pump is seizing with no messages, manually check the pump rotation. Perform pump maintenance.
What to do if my Alcatel Vacuum Technology Adixen ATP 400 HPC Water Pump controller is overheating (D22)?
If the Alcatel Vacuum Technology Water Pump displays the error 'D22 : CONTROLLER OVERHEAT' and the temperature exceeds 60°C, check the controller cooling circuit, including air admissions and the fan. Additionally, reduce the working pressure or the flow rate.
What does WO3 ACT TEMP mean on my Alcatel Vacuum Technology Adixen ATP 400 HPC?
If your Alcatel Vacuum Technology Water Pump displays 'WO3 : ACT TEMP.' because the controller temperature is high (between 60 and 70°C for ACT 600 T or 65 and 75°C for ACT 200 T), check the controller cooling circuit. This includes the internal fan for ACT 600T and the ventilation for ACT 200T.
What does W04 pump temp mean on my Alcatel Vacuum Technology Adixen ATP 400 HPC Water Pump?
If your Alcatel Vacuum Technology Water Pump displays 'W04 : PUMP TEMP.' because the pump temperature is between 75 and 85°C, check the pump ventilation.
What does WO1 greasing mean on my Alcatel Vacuum Technology Water Pump?
If your Alcatel Vacuum Technology Water Pump displays 'WO1 : GREASING' because the authorized limit for ball bearing maintenance time has been reached, regrease the pump and initialize the maintenance counter.
What does error D07 pump current mean on my Alcatel Vacuum Technology Adixen ATP 400 HPC?
If the Alcatel Vacuum Technology Water Pump displays the error 'D07 : PUMP CURRENT' due to motor overcurrent or Hall sensor default, reinitialize the controller with the main switch (0/1).
General| Brand | Alcatel Vacuum Technology |
|---|---|
| Model | Adixen ATP 400 HPC |
| Category | Water Pump |
| Language | English |
Overview of the ATP range and associated ACT controllers.
Explains how turbomolecular pumps operate.
Provides technical specifications and physical dimensions for pumps and controllers.
Provides essential safety instructions for pump installation and operation.
Details pump connections, mechanical, water cooling, and electrical setup.
Procedures for starting up ACT controllers and wiring serial links.
Initial pump start-up, safety, and basic operation in pumping applications.
Using the controller front panel and displaying operational data.
Safety precautions before maintenance and pump lubrication procedures.
Procedures for bearing replacement and pump running-in.
Technical data for standard, 'C' corrosive, and 'HPC' version ATP pumps.
Safety instructions for handling, storage, installation, and start-up.
Controller self-test, parameter keys, and menu configuration.
Configuration settings for the serial link interface.
Controller self-test, parameter keys, and menu configuration.
Detailed steps for programming controller parameters.
Setting rotation speed and monitoring faults.
How faults are indicated on the OEM Board controller.
Recommended procedure for the first pump start-up.
General safety instructions for pump use and handling.
Details specific fault codes and their remedies.
Details specific fault codes and their remedies.
Electrical isolation, installation checks, and post-maintenance tests.
Lubrication safety, syringe use, and bearing lubrication steps.
How to increase the MAINTENANCE counter after regreasing.
To Next Page
