What to do if the D04 pump temperature exceeds the limit in my Alcatel Vacuum Technology Adixen ATP 400?
If the Alcatel Vacuum Technology Water Pump motor temperature exceeds the authorized limit of 85°C, ensure the cooling circuit is functioning correctly. Also, reduce the working pressure or the flow rate. If the problem persists, contact Alcatel Customer Service.
What to do if my Alcatel Vacuum Technology Water Pump is overheating (D21)?
If the Alcatel Vacuum Technology Water Pump displays the error 'D21 : PUMP OVERHEAT', verify the pump's cooling system. It might also help to reduce the working pressure or the flow rate.
What to do if the D03 ACT temperature exceeds the limit in my Alcatel Vacuum Technology Water Pump?
If the Alcatel Vacuum Technology Water Pump controller temperature exceeds the authorized limit (70°C for ACT 600T or 75°C for ACT 200T), check that the cooling circuit is operating correctly. For ACT 600T, verify the internal fan; for ACT 200T, check the ventilation.
What to do if my Alcatel Vacuum Technology Water Pump is too hot (D23)?
If your Alcatel Vacuum Technology Water Pump displays the error 'D23 : HOT PUMP' because the pump temperature exceeds 75°C, first check the pump cooling. Then, reduce the pressure or the flow. Note that if the default is still present, the D21 error appears.
What to do if my Alcatel Vacuum Technology Adixen ATP 400 isn’t running?
If your Alcatel Vacuum Technology Water Pump isn’t running or the pump is seizing with no messages, manually check the pump rotation. Perform pump maintenance.
What to do if my Alcatel Vacuum Technology Water Pump controller is overheating (D22)?
If the Alcatel Vacuum Technology Water Pump displays the error 'D22 : CONTROLLER OVERHEAT' and the temperature exceeds 60°C, check the controller cooling circuit, including air admissions and the fan. Additionally, reduce the working pressure or the flow rate.
What does WO3 ACT TEMP mean on my Alcatel Vacuum Technology Adixen ATP 400?
If your Alcatel Vacuum Technology Water Pump displays 'WO3 : ACT TEMP.' because the controller temperature is high (between 60 and 70°C for ACT 600 T or 65 and 75°C for ACT 200 T), check the controller cooling circuit. This includes the internal fan for ACT 600T and the ventilation for ACT 200T.
What does W04 pump temp mean on my Alcatel Vacuum Technology Adixen ATP 400 Water Pump?
If your Alcatel Vacuum Technology Water Pump displays 'W04 : PUMP TEMP.' because the pump temperature is between 75 and 85°C, check the pump ventilation.
What does WO1 greasing mean on my Alcatel Vacuum Technology Water Pump?
If your Alcatel Vacuum Technology Water Pump displays 'WO1 : GREASING' because the authorized limit for ball bearing maintenance time has been reached, regrease the pump and initialize the maintenance counter.
What does error D07 pump current mean on my Alcatel Vacuum Technology Water Pump?
If the Alcatel Vacuum Technology Water Pump displays the error 'D07 : PUMP CURRENT' due to motor overcurrent or Hall sensor default, reinitialize the controller with the main switch (0/1).
General| Brand | Alcatel Vacuum Technology |
|---|---|
| Model | Adixen ATP 400 |
| Category | Water Pump |
| Language | English |
Explains the fundamental operating mechanism of turbomolecular pumps.
Provides detailed specifications and performance data for ATP pumps.
Essential safety guidelines before operating or installing the pump.
How to physically connect the pump to the vacuum installation.
Wiring procedures for ACT 200 T and 600 T controllers.
Step-by-step guide for starting up ACT 200 T and 600 T controllers.
Step-by-step guide for starting up the ACT 1000 T controller.
Initial startup procedures and crucial safety instructions.
How to operate the pump in a vacuum application.
Troubleshooting guide for ACT 200 T and 600 T controllers.
Troubleshooting guide for the ACT 1000 T controller.
Safety measures and precautions before performing maintenance.
Step-by-step guide for replacing bearings in ATP 80/100 pumps.
Step-by-step guide for replacing bearings in ATP 150/400/900.
Running-in procedure for ATP 80, 100, 150, and 400 pumps.
Running-in procedure specifically for the ATP 900 pump.
To Next Page
