What does error D08 no connect mean on my Alcatel Vacuum Technology Adixen ATP 400 HPC Water Pump?
If the Alcatel Vacuum Technology Water Pump displays 'D08 : NO CONNECT', check the cable connection to the pump.
What does error D26 no connect mean on my Alcatel Vacuum Technology Water Pump?
If the Alcatel Vacuum Technology Water Pump displays 'D26 : NO CONNECT', check the cable controller electrical connection.
What does error D02 DLY software mean on my Alcatel Vacuum Technology Adixen ATP 400 HPC?
If the Alcatel Vacuum Technology Water Pump displays 'D02 : DLY SOFTWARE' due to a soft counter default, reinitialize the controller with the main switch (0/1).
What does error D01 EXT safety mean on my Alcatel Vacuum Technology Adixen ATP 400 HPC?
If the Alcatel Vacuum Technology Water Pump displays 'D01 : EXT SAFETY' because the external security contact on the REMOTE CONTROL connector is activated, test the external safety devices (contact 31 - 32); repair the fault and press START to restart.
General| Brand | Alcatel Vacuum Technology |
|---|---|
| Model | Adixen ATP 400 HPC |
| Category | Water Pump |
| Language | English |
Overview of the ATP range and associated ACT controllers.
Explains how turbomolecular pumps operate.
Provides technical specifications and physical dimensions for pumps and controllers.
Provides essential safety instructions for pump installation and operation.
Details pump connections, mechanical, water cooling, and electrical setup.
Procedures for starting up ACT controllers and wiring serial links.
Initial pump start-up, safety, and basic operation in pumping applications.
Using the controller front panel and displaying operational data.
Safety precautions before maintenance and pump lubrication procedures.
Procedures for bearing replacement and pump running-in.
Technical data for standard, 'C' corrosive, and 'HPC' version ATP pumps.
Safety instructions for handling, storage, installation, and start-up.
Controller self-test, parameter keys, and menu configuration.
Configuration settings for the serial link interface.
Controller self-test, parameter keys, and menu configuration.
Detailed steps for programming controller parameters.
Setting rotation speed and monitoring faults.
How faults are indicated on the OEM Board controller.
Recommended procedure for the first pump start-up.
General safety instructions for pump use and handling.
Details specific fault codes and their remedies.
Details specific fault codes and their remedies.
Electrical isolation, installation checks, and post-maintenance tests.
Lubrication safety, syringe use, and bearing lubrication steps.
How to increase the MAINTENANCE counter after regreasing.
To Next Page
