Alcatel Fierce - Connecting to Bluetooth Devices; Connecting to a Computer

59 60
6.3 Connecting to Bluetooth
®
devices
(1)
Bluetooth is a short-range wireless communication technology that you can use to exchange data, or
connect to other Bluetooth devices for various uses.
To access this function, drag down notification panel, touch
and then the Settings icon to access
Settings. Then touch Bluetooth, your device and other available ones will show on the screen.
To turn on Bluetooth
• Drag down notification panel, touch and then the Settings icon to access Settings.
• Touch to activate/deactivate this function.
To make your phone more recognizable, you can change your phone name which is visible to others.
• Drag down notification panel, touch and then the Settings icon to access Settings.
• Touch Bluetooth.
• Touch and hold the Menu key and touch Rename phone.
• Enter a name, and touch Rename to confirm.
To make device visible
• Drag down notification panel, touch and then the Settings icon to access Settings.
• Touch Bluetooth.
• Touch your device to make it visible or invisible.
• Touch and hold the Menu key and touch Visibility timeout to select the visible time.
To pair/connect your phone with a Bluetooth device
To exchange data with another device, you need to turn Bluetooth on and pair your phone with the
Bluetooth device with which you want to exchange data.
(1)
You are recommended to use ALCATEL ONE TOUCH Bluetooth
®
headsets, which have been tested and proved
compatible with phone. You can go to www.alcatelonetouch.com for more information about ALCATEL ONE
TOUCH Bluetooth
®
headset.
• Drag down notification panel, touch and then the Settings icon to access Settings.
• Touch Bluetooth
• Touch SEARCH FOR DEVICES
• Touch a Bluetooth device you want to be paired with in the list.
• A dialog will popup, touch Pair to confirm.
• If the pairing is successful, your phone connects to the device.
To disconnect/unpair from a Bluetooth device
• Touch the Settings icon beside the device you want to unpair.
• Touch Unpair to confirm.
6.4 Connecting to a computer
With the USB cable, you can transfer media files and other files between microSD card/internal storage
and computer.
Before using MTP or PTP you should firstly mark USB debugging.
• To access this function, touch Settings\About phone, then touch Build number 7 times. Now you
may touch Settings\Developer options\USB debugging.
To connect/disconnect your phone to/from the computer:
• Use the USB cable that came with your phone to connect the phone to a USB port on your
computer. You will receive a notification that the USB is connected.
• If you use mass storage, open the Notification panel and touch USB connected, then touch Mount
in the dialog that opens to confirm that you want to transfer files.
• If you use MTP or PTP, your phone will be automatically connected.