Broker call:
Function enabling the user to switch back and forth between several simultaneous
calls.
Call transfer:
Function enabling a call to be transferred to another telephone within the system.
Common directory:
This directory contains all the speed-dial numbers accessible to the users
of the Alcatel system.
Conference:
The conference function allows the user, in contact with two correspondents,
to set up a three-way conference.
DECT:
European cordless telephone standard: Digital Enhanced Cordless
Telecommunication.
DECT telephone: cordless telephone complying with the DECT standard.
GAP (Generic Access Profile):
Specific operating mode defined in the European DECT standard. The telephone
GAP mode is a basic and simplified form of operation compatible with other DECT
GAP systems (other PBX or indoor relay).
Hunting group:
Several telephones grouped under one directory number. A call to this number
is directed to one of the free telephones within the group.
Intrusion:
Function allowing intrusion into a conversation between two correspondents.
Parking:
This function places an outside call on hold, for subsequent recovery on another
“authorised” extension within the system.
Password:
This password controls access to the programming and terminal locking functions
by the user (default password: 1515).
Personal directory:
This directory contains the personal numbers of the user of a terminal.
Pick-up group:
This function enables you to answer a call ringing on another terminal.
Calls can only be picked up within the pick-up group.
Sending DTMF signals:
During a conversation, DTMF codes are sometimes required.These codes are used
when a user wants to consult a voice server, access a PABX or remotely consult an
answering machine.
To Next Page
