1. From any home screen, tap Messaging.
2. Tap the + plus sign to create a message.
3. Tap the + plus sign again to expand the menu.
4. Tap Pictures to insert a saved picture.
5. Tap Videos to insert a saved video.
6. Tap the desired picture or video.
7. Tap the check mark to insert the picture or video into the message.
8. Scroll down and enter a message.
Note: You are not required to enter a message. However, you must scroll down to the message field for
the Send icon to become available.
9. When finished, tap Send MMS to send.
Text to Speech
Set up & turn on
To set up and use text to speech, follow these steps:
1. From any Home screen, tap the All apps icon.
2. Tap Settings.
3. Scroll down to 'PERSONAL,' then tap Language & input.
4. Scroll down to 'SPEECH,' then tap Text-to-speech settings.
5. Under 'PREFERRED ENGINE,' make selection:
o Google Text-to-speech Engine
o Pico TTS
6. Tap the Settings icon.
7. Tap Language, and then select the desired language.
8. Tap Install voice data.
9. Tap Download next to the desired language:
o Spanish (Spain)
o French (France)
o German (Germany)
o Italian (Italy)
Settings
Text to speech reads messages out loud, allowing you to listen to text or messages instead of reading them. To
change text to speech settings, follow these steps:
1. From any Home screen, tap the All apps icon.
2. Scroll down to 'PERSONAL,' then tap Language & input.
3. Scroll down to 'SPEECH,' then tap Text-to-speech settings.
4. Under 'GENERAL,' tap Speech rate.
5. Select one of the following options:
o Very slow
o Slow
o Normal
o Fast
o Very fast
6. If necessary, tap Listen to an example to play a preview of your current settings.
Voice Commands
This feature is not available.
Content Management
Add contact
To Next Page
Loading...
