ALCOLOCK GR3
GETTING STARTED
ALCOHOL INFLUENCE ON TESTING
WARNING! Drinking alcohol and eating foods containing
alcohol may cause a failed alcohol test.
Some factors that may affect the results of a test (because
of possible residual alcohol in the mouth) are consumption
of medicines, drops, gum, smoking and using mouthwash or
mouth spray. Rinsing the mouth with water and swallowing
after consumption of these products will remove possible
alcohol contamination.
Do not eat, smoke or drink for at least 15 minutes before
taking a test. Also, before taking a test, refrain from using
windshield washer uid for at least 10 minutes or using any
aerosol air fresheners, disinfectants, cologne, or perfume in
the vehicle, as these can also contain alcohol.
NOTE: The above list of factors that may affect the
results of a breath test is not exhaustive. There are
additional items that also may affect the results. Follow
this guide carefully to avoid incorrect results and consult
the service centre.
TERMS USED IN THIS MANUAL
• BrAC = Breath Alcohol Concentration
• BAC = Blood Alcohol Concentration
• Preset Limit = Set according to local regulations
• ECU = Electronic Control Unit
DISPLAY ICONS
The handset is in communication with the ECU.
There is no communication between the handset
and the ECU.
The power indicator is illuminated by 5 power
bars. Charge the handset if only 1 power bar
remains.
To Next Page
Loading...
