Alderlea T4 - Firebrick Installation

©PACIFIC ENERGY FIREPLACE
PRODUCTS LTD.
19
080515-24 ALT4
This package contains 12 full-size  rebricks, as well as 2 various cut bricks.
With the heater in the upright position, install  rebricks as follows:
1. Install 4 full-size  rebricks against the rear wall.
2. Install the side  rebricks, 2 full-size each side.
3. Place 3 full-size and 2 cut bricks on the bottom of the heater.
ITEM SIZE
A 1 1/2” X 4 1/2” X 1 1/4”
B 4” X 4 1/2” X 1 1/4”
C 9” X 4 1/2” X 1 1/4”
C
B
A
Firebrick Installation