EasyManua.ls Logo

ALDI Auto XS FLX-WH-01 - Car Jack Usage; Vehicle Preparation; Car Jack Placement

ALDI Auto XS FLX-WH-01
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
CAR JACK USE
DANGER!
Danger of personal injury!
If the car jack is not properly placed (under a vehicle), it will
not be possible to lift vehicles steadily and they could also fall
suddenly� This can cause serious injury or death�
For correct use and placement of the car jack, read the vehicle
instructions�
Vehicle preparation
1� Before using the car jack, ensure that the hand brake is fully
applied�
2� If the vehicle is an automatic transmission, place it in “Park”�
3� Place manual transmission vehicles into 1st gear
4� Safely wedge the wheels (wedges are not included)�
Car jack placement
1� Ensure that the lifting arm
5
is fully released�
2� Ensure that the release valve
10
is closed, so that the plug on
the end of the jack handle
8
is turned fully in a clockwise
direction (see picture E)�
3� Carefully place the saddle
4
of the car jack under the lifting
point recommended by the vehicle manufacturer
4� Pump the jack handle until the top of the saddle reaches the
lifting point on the vehicle�
Car jack use

Related product manuals