22
Adding oil
WARNING!
Damage and injury risks!
If too much oil is added to the reservoir, the car jack will become
overloaded and can cause injury�
– Only fill as much oil in the reservoir as recommended in this
section�
NOTICE
Risk of injury!
If using incorrect oil, the car jack can be damaged or broken�
– Only use the oil which is specified in the “Technical details“
section�
1� Fully release the car jack and ensure that the release valve
10
is turned clockwise, then lift the cover plate
6
�
2� Carefully lift and with a screwdriver, remove the oil filler plug
16
of the oil reservoir
17
�
3� Add oil, so that it covers the
reservoir piston� Ensure oil is not
spilled� If necessary, use a funnel
to add oil�
4� Clean the oil filler plug and put it
back in the oil reservoir ensuring
that it is in the correct position�
5� Lower the cover plate�
16
17
Maintenance, repair and inspection
To Next Page
Loading...
Need help?
General
