Spare parts and accessories
26
Problem Possible cause Solution
Extensive
paint mist
(overspray).
• Not close enough to the
object being sprayed.
• Reduce the spraying distance.
• Too much material ap-
plied.
• Turn the adjusting screw for
material flow control to the left (–).
Poor cover-
age on the
wall.
• Material too cold. • Wait until the material has
reached room temperature.
• Highly absorbent sub-
strate or paint has poor
coverage.
• Apply a cross coat.
• Too far away. • Go closer to the object.
Spare parts and accessories
You can order suitable spare parts and accessories for your paint spray system online:
www.einhell.co.uk.
You will find current prices and information here. You should provide the following
data when ordering spare parts:
• Model: DS-FSS 500
• Article number (Einhell): 42.600.33
• Identification no: 11018
• Spare part number of the spare part required (can be found at www.einhell.co.uk)
Technical data
Model: DS-FSS 500
Article number: 97513
Supply voltage: 220–240 V~ / 50 Hz
Nominal output: 500W
Protection class: II
Weight: 2 kg
Container volume: 900 / 1200ml
∅ Nozzles: 1.0 / 2.5 / 3.5 mm
Max. flow rate: 1000 ml/min
Max. viscosity 150 DIN-sec