To Next PageTo Next PageWhat to do if my ALDI Paint Sprayer stops automatically?
If your ALDI Paint Sprayer stops automatically, it could be due to an empty battery pack. Try replacing it with a new battery pack or recharge the current one. Alternatively, the multi nozzle adaptor might be blocked, activating the current protection. Remove the multi nozzle adaptor and turn on the spray gun. If it works normally, replace the multi nozzle adaptor.
Why my ALDI Paint Sprayer does not start?
If your ALDI Paint Sprayer does not start, make sure the battery pack is correctly attached; you should hear a click when it engages. If it's not starting, the battery pack might be out of charge, so replace it or recharge it. A defective battery can also prevent the sprayer from starting; in this case, replace it with a new battery pack.
How to fix inconsistent pressure on ALDI FERREX 63349?
Inconsistent pressure in your ALDI Paint Sprayer can occur if additional air is being drawn into the spray gun. Check the connection between the hose adapter and the 6m hose to ensure it is properly sealed.
Why does the outlet pressure increase suddenly on my ALDI FERREX 63349?
If the outlet pressure of your ALDI Paint Sprayer increases suddenly, it might be because the multi nozzle adaptor is blocked. Replace it with a new one.
What to do if my ALDI FERREX 63349 Paint Sprayer drains out water after stopping?
If your ALDI Paint Sprayer drains water after you stop using it, this is likely because water remains in the extension lance and pump. To resolve this, drain all the water completely before storing the sprayer.
How to fix ALDI FERREX 63349 Paint Sprayer multi nozzle adaptor leak?
If the multi nozzle adaptor on your ALDI Paint Sprayer is leaking, it's likely that the fixing nail of the multi nozzle adaptor has loosened. Tighten it using a hex key (not supplied).
General| Brand | ALDI |
|---|---|
| Model | FERREX 63349 |
| Category | Paint Sprayer |
| Language | English |
