ALDI FERREX 63349 - Assembly; Attaching Extension Lance to the Power Nozzle; Attaching the Multi Nozzle Adaptor

20V Pressure Spray Gun
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: №. CHW18W.91 • 01/2021 • 63349
(toll free)
10
Attaching the multi nozzle adaptor (9) (Fig B1, B2)
Pull back the collar at the end of the lance (7), align and insert the multi nozzle
adaptor (9) into the lance (7). Release the collar to lock the nozzle adaptor (9) in
place.
After attaching, gently pull the multi nozzle adaptor (9) to make sure it is locked
securely.
Assembly
WARNING: Remove the battery pack before assembling the
spray gun!
Attaching extension lance (7) to the power nozzle (6) (Fig A)
When attaching, align the two projections on the extension lance (7) with
the grooves of the power nozzle (6), then push the nozzle in and rotate in a
clockwise direction to engage the lance securely.
B2
A
1
2
1
B1
2
1