ALDI FERREX 63349 - Maintenance; Battery Maintenance

AFTER SALES SUPPORT
(toll free)
20V Pressure Spray Gun
e-mail: info.aldi@positecgroup.com1300 889 028
MODEL No.: CHW18W.91 • 01/2021 • 63349
15
Maintenance
nozzle, direct spray away from self or others, and always operate in an
area clear of all persons, pets and obstacles. Do not operate the product
when fatigued or under the inuence of alcohol or drugs, stay alert at all
times.
Reduce residual risks by using the 20V Spray Gun with care and following all
safety notes as well as other instructions.
WARNING: Always ensure that the product is switched o and
the battery pack (4) is removed before making any adjustment.
Cleaning
Clean the case only with a damp cloth. DO NOT use solvents when cleaning
plastic parts. Plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use a clean cloth to
remove dirt, dust, oil, grease etc, then dry well.
Battery Maintenance
To maintain battery capacity, always refer to the specic instructions in the
supplied manual included with the purchase of ALDI Xnity Batteries. It is
recommended to recharge your battery every two months. Store only fully
charged batteries. They should therefore be recharged from time to time.
The place of storage must be dry.
CAUTION! Electrical and battery operated units that no longer
work should not be disposed of in the household waste! They
are to be collected separately, in accordance with your local waste
disposal regulations.
ATTENTION! Batteries must be removed from battery powered
tools and disposed of separately in accordance with relevant
waste battery regulations.
Batteries must never be disposed of with domestic waste!
Please discard power tools no longer usable at a local collection point.
Collection and disposal of packaging materials separately by types
complying with local rules and regulations. For details, please contact your
local council.