ALDI FERREX 63349 - Attaching Your Own Water Hose (Optional); Before Operation

20V Pressure Spray Gun
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: №. CHW18W.91 • 01/2021 • 63349
(toll free)
12
Attaching your own water hose (optional)
Firstly, remove the hose adapter (3) (Fig E1 E2), then attach your home
garden hose with suitable connectors (Fig E3).
WARNING! It is not recommended to connect the 6m hose (11)
directly on your garden hose or your home tap.
NOTE: Except for the 6m hose (11) supplied, you can also connect the power
nozzle to your own water hose with suitable connectors.
NOTE: Check whether the hose lter (13) screen is missing before
retightening the hose adapter (3) (Fig E2). When retightening the hose
adapter (3), tighten securely (using a 17mm spanner, not supplied).
Otherwise, it may not draw any water for proper operation.
NOTE: The tool is compatible with ALDI 20V Xnity batteries and chargers.
Xnity Battery pack and charger is not included with this product; it is shown
only for illustrative and instructional purposes only.
Installing and removing the battery pack (Fig. F1, F2)
1. To attach the battery align the grooved guide rails of the battery pack (4)
with the raised guide rails on the bottom of the spray gun. A click will be
heard when the battery pack (4) is engaged correctly (Fig F1).
2. To remove the battery pack (4), press down the battery release button
and pull the battery pack (4) away from the spray gun (Fig F2).
Charging the battery pack (Fig. F3)
1. Charging the battery pack (4) (Fig F3).
E2
E3
Suitable
Connector
16
Before operation
E1