300W multifunctional tool
11
GB IRE
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
GB +44 (0) 1904 727501
+353 (0) 19022605
Operational safety instructions for your multifunctional
tool
– Hold the multifunctional tool by the insulated handles when performing work
where there is a risk of the fitted tool being used coming into contact with
hidden power lines. Contact with a live line could also energise metallic parts of
the device and inflict an electric shock.
– Always wear protective goggles and a dust mask when sanding; especially
when sanding overhead.
– Wear ear protection.
– Wear protective gloves when changing the fitted tools. Fitted tools become hot
after prolonged use.
– Use the multifunctional tool only for dry sanding.
– Only use sand paper of the length that you need. Any paper protruding from the
sanding plate can cause serious injury.
– Never expose the multifunctional tool to high temperatures (heaters etc.) or to
the effects of the weather (rain etc.).
– Keep your hands away from the work area. Do not reach under the work piece.
There is a risk of injury resulting from contact with the saw blade or scraper.
– Grip the multifunctional tool with two hands and maintain a stable posture to
avoid the risk of serious injury. When working with the multifunctional tool,
always hold it firmly with both hands and provide for a secure stance.
– Only scrape materials that have not been moistened (e.g. wallpaper) and do not
scrape on a wet base.
– Adopt a stance that prevents injury in the event of slipping off the work piece.
– Only use fitted tools that are in proper technical condition.
– Fitted tools may become extremely hot. After making a cut, do not touch the
fitted tool and make sure that the multifunctional tool is kept in a safe place once
you have finished work.
– When working on masonry or ceilings, take note of the location of electric pipes
as well as water and sewage pipes.
– Never place the multifunctional tool or the accessories on or near hot surfaces
(e.g. radiators).
Safety