300W multifunctional tool
6
GB IRE
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
GB +44 (0) 1904 727501
+353 (0) 19022605
General information
Reading and storing the user manual
This user manual accompanies this 300W multifunctional tool. It contains
important information on start-up and handling.
For improved readability, the 300W multifunctional tool will be referred to
only as the “multifunctional tool” below.
Before using the multifunctional tool, read the user manual carefully. This particularly
applies to the safety notes. Failure to heed this user manual may result in severe
injury or damage to the multifunctional tool.
The user manual is based on the standards and rules in force in the European Union.
When abroad, you must also observe country-specific guidelines and laws.
Store the user manual for future use. Make sure to include this user manual when
passing the multifunctional tool on to third parties.
Proper use
The multifunctional tool is only designed for private users in connection with hobby
and DIY projects for the following purposes:
• sawing, cutting, scraping and sanding various materials in hard-to-reach
areas.
Any other applications are expressly prohibited and are deemed improper use.
Neither the manufacturer nor the retailer can accept any responsibility for injury,
loss or damage caused by misuse of this product of any kind. Examples of misuse are
given in the following non-exhaustive list:
• Using the multifunctional tool for other than the intended purposes;
• Failure to observe the safety instructions and warnings as well as the
assembly, operating, maintenance and cleaning instructions contained in
this user manual;
• Failure to comply with any regulations relating to accident prevention,
occupational medicine or safety, which specifically and/or generally apply to
the use of this multifunctional tool;
• Use of accessories and spare parts not intended for the multifunctional tool;
• Modifications to the multifunctional tool;
• Repairs of the multifunctional tool performed by parties other than the
manufacturer or a qualified professional;
• Use of the multifunctional tool for commercial or industrial applications as
well as in connection with the trades;
General information
To Next Page
Loading...
