What to do if the ALDI FERREX FAM 20-I multifunction tool cannot be switched on?
If your ALDI Power Tool won't switch on, the On/Off switch might be stuck. Try cleaning the On/Off switch. If cleaning doesn't resolve the issue, the switch may be defective, and you should contact the manufacturer's after-sales support to have it replaced.
Why can't I increase or decrease the oscillation speed on my ALDI FERREX FAM 20-I?
The oscillation rate preselector 5 might be dirty. Clean the oscillation rate preselector and the gap with a vacuum cleaner, if necessary.
What to do if the tool holder on my ALDI Power Tool does not move after switching it on?
If the tool holder isn't moving after you switch on your ALDI Power Tool, there might be dirt, wood chips, or other objects in the gap of the tool holder. Remove the battery and clean the gap with a vacuum cleaner. If this doesn't solve the problem, contact the after sales support of the manufacturer.
What to do if the extractor line keeps falling off my ALDI FERREX FAM 20-I?
If the extractor line or dust extraction adapter keeps falling off your ALDI Power Tool, it might not be properly attached. Push the dust extraction adapter firmly onto the connecting nozzle of the extractor line and turn it anticlockwise to fix it in place.
General| Brand | ALDI |
|---|---|
| Model | FERREX FAM 20-I |
| Category | Power Tool |
| Language | English |
Comprehensive safety guidelines applicable to all power tools.
Safety measures concerning the environment where the power tool is operated.
Crucial safety rules related to electrical connections and usage of power tools.
Guidelines for operator's personal safety, including alertness and PPE.
Best practices for using and maintaining power tools to ensure safety.
Specific safety and care instructions for cordless power tools and batteries.
Specific safety precautions for operating this multifunction tool.
Safety measures to take when sanding materials that might contain lead.
Guidelines for safe dust extraction and handling, especially with hazardous dusts.
Adjusting the speed variability between 5,000 and 16,000 rpm using the oscillation rate preselector.
Procedure for turning the multifunction tool on and off using the On/Off switch.
Guidance on operating the tool for various tasks like sawing, scraping, and sanding.
Table of common problems, their possible causes, and solutions for the multifunction tool.
To Next Page
