Safety
13
f) Do not expose a rechargeable battery to fire or excessively high
temperatures.
Fire or temperatures above 130 °C may cause an
explosion.
g) Carefully follow all instructions for charging the battery and never
charge the battery or cordless tool outside of the temperature
range indicated in the instructions.
Improper charging or charging
outside of the permitted temperature range may damage the battery
and increase the risk of fire.
Service
a) Have your power tool serviced by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
the power tool is maintained.
b) Never perform maintenance on damaged rechargeable batteries.
Only the manufacturer or authorised service companies may perform
maintenance on rechargeable batteries.
Safety instructions for multifunction tools
− Hold the multifunction tool by the insulated handles when performing
work where there is a risk of the fitted tool being used coming into contact
with hidden power lines. Contact with a live line could also energise
metallic parts of the device and inflict an electric shock.
− Always wear protective goggles and a dust mask when sanding;
especially when sanding overhead.
− Wear ear protection.
− Wear protective gloves when changing the fitted tools. Fitted tools
become hot after prolonged use.
− Use the multifunction tool only for dry sanding.
− Use only the sandpaper supplied with the multifunction tool or the
same-sized replacement sandpaper. Any paper protruding from the
sanding plate can cause serious injury.
− Never expose the multifunction tool to high temperatures (heaters etc.) or
to the effects of the weather (rain etc.).
− Secure the workpiece. A workpiece held in place with clamping fixtures
or in a vice is more secure than if held by hand. Keep your hands away
from the work area. Do not reach under the work piece. There is a risk of
injury resulting from contact with the saw blade or scraper.
To Next Page
Loading...
