Cleaning and maintenance
22
WARNING!
Risk of burns!
Some of the tools get hot during operation and you could burn
yourself.
− Always let the tool cool off completely before cleaning.
NOTICE!
Risk of damage!
Improper handling of the multifunction tool may result in damage
to the multifunction tool.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, or sharp or metallic cleaning utensils such as
knives, hard scrapers and the like. They could damage the
surfaces.
− Make sure that no water or other liquids penetrate the housing
of the multifunction tool.
Cleaning the multifunction tool
After every use
1. Unlock the extractor line
15
and remove it from the multifunction tool.
2. Use a soft brush or compressed air to clean the extractor line and the housing.
3. Wipe the housing off with a damp cloth if heavily soiled and then wipe it
completely dry.
4. Attach the extractor line to the multifunction tool again.
After every eight hours of operation
1. Unlock the extractor line and remove it.
2. Use commercially available universal oil to lubricate the moving parts of the tool
holder
8
.
3. Attach the extractor line to the multifunction tool again.
To Next Page
Loading...
