65 W Multifunctional sharpener
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL No.: BDS651 • 05/2021 • 705715
(toll free)
Maintenance
Remove the plug from the mains power socket before carrying out any
adjustment, servicing or maintenance.
Your sharpener requires no additional lubrication or maintenance.
There are no user serviceable parts in your sharpener. Never use water or
chemical cleaners to clean your sharpener. Wipe clean with a dry cloth.
Always store your sharpener in a dry place. Keep the motor ventilation slots
clean. Keep all working controls free of dust. Occasionally you may see
sparks through the ventilation slots.
This is normal and will not damage your sharpener.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualied persons in order to avoid a hazard.
Clean the moulded plastic housing of the machine using a soft brush and
clean cloth.
Do not use water, solvents or polishes. Remove all debris, especially from the
motor cooling vents.
Store in a secure, dry place out of the reach of children.
Do not place other objects on the product.
Storage and cleaning
10) When you have nished sharpening, turn o the sharpener by moving
the on/o switch (10) to the “O” position. Before removing the module,
ensure the grinding wheel has stopped.
11) Recommend that after grinding, the blade tip is honed on an oil stone.
15
To Next Page
Loading...
