ALDI Ferrex 706193 - Technical Specifications; Tool Specifications; Compliance Standards

13W Engraving Tool
AFTER SALES SUPPORT
(toll free) MODEL No.: PER13G1.A • 07/2021 • 706193
e-mail: info.aldi@positecgroup.com
AU
14
1300 889 028
AU
Technical Specications
This 13W Engraver complies with the following Standards:
Safety: IEC 62841-1
AS/NZS 62841.1
EMC: EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
Power supply 230-240V~50Hz
Rated power 13W
Periodic duty 30s on, 90s o
No load speed 6000 /min
Engraving bit Tungsten carbide tipped steel
Cord length 1.8 m
Tool weight 0.37 kg
Protection degree: Class II
Product dimensions 165*45*65 mm