7
Damaged or modied batteries may exhibit unpredictable behaviour
resulting in re, explosion or risk of injury.
f) Do not expose a battery pack or tool to re or excessive temperature.
Exposure to re or temperature above 130 °C may cause explosion.
g) Follow all charging instructions and do not charge the battery pack
or tool outside the temperature range specied in the instructions.
Charging improperly or at temperatures outside the specied range may
damage the battery and increase the risk of re.
6) Service
a) Have your power tool serviced by a qualied repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
b) Never service damaged battery packs.
Service of battery packs should
only be performed by the manufacturer or authorized service providers.
a) Hold the power tool by insulated gripping surfaces, when performing
an operation where the fastener may contact hidden wiring.
Fasteners
contacting a “live” wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
Screwdriver safety warning
To Next Page
Loading...
