ALDI FERREX CSD36X - Service Support; After Sales Support Contact; Service Support Contact

3.6V Li-Ion Screwdriver
AFTER SALES SUPPORT
(toll free) MODEL: . CSD36X • 08/2020 • 702812
e-mail: info.aldi@positecgroup.com
AUS
14
1300 889 028
AUS
FAQ/Troubleshooting
Frequently Asked Question
1. REASONS FOR DIFFERENT BATTERY CELL WORKING TIMES
Having not used the 3.6V Li-Ion Screwdriver for a prolonged time will reduce
the battery cell working time. This can be corrected after several charge and
discharge operations by charging & working with your 3.6V Li-Ion
Screwdriver. Heavy working conditions such as large screws into hard wood
will use up the battery cell energy faster than lighter working conditions. Do
not charge your 3.6V Li-Ion Screwdriver below 0
o
C and above 40
o
C as this will
aect performance.
2. WHAT IS THE FUNCTION OF THE FORWARD/REVERSE
ROTATING?
Forward/reverse rotating function allows you to change the direction of
the motor while either end of forward / reverse operation button (3) is
depressed.
Driving in screws uses the forward mode. The reverse mode is intended for
the removal of screws.
3. WHAT DO I DO IF I HAVE AN ISSUE WITH MY 3.6V LI-ION
SCREWDRIVER?
If you have any issues with your 3.6V Li-Ion Screwdriver, please contact our
Customer Service line on 1300 889 028.
For further inquiries or issues associated with your 3.6V Li-Ion Screwdriver , call
our Customer Service on 1300 889 028 or email us at info.aldi@positecgroup.
com.