3.6V Li-Ion Screwdriver
AFTER SALES SUPPORT
(toll free) MODEL: . CSD36X • 08/2020 • 702812
e-mail: info.aldi@positecgroup.com
AUS
12
1300 889 028
AUS
WARNING: Before carrying out any adjustment, servicing or
maintenance, make sure the screwdriver is turned o.
● Your power tool requires no additional lubrication or maintenance.
There is no user serviceable parts in your power tool. Never use water
or chemical cleaners to clean your power tool. Wipe clean with a dry
cloth. Always store your power tool in a dry place.
For battery tools
● The ambient temperature range for the screwdriver use and storage is
0
o
C to 40
o
C.
● The recommended ambient temperature range for the charging
system during charging is 0
o
C to 40
o
C.
Maintenance
Warranty
Your new FERREX® 3.6V Li-Ion Screwdriver will more than satisfy your expec-
tations. It has been manufactured under stringent FERREX® Quality Standards
to meet superior performance criteria.
You will nd your new FERREX® 3.6V Li-Ion Screwdriver easy and safe to oper-
ate, and, with proper care, it will give you many years of dependable service.
CAUTION. Carefully read through this entire instruction manual before using
your new FERREX® 3.6V Li-Ion Screwdriver.
Take special care to heed the Cautions and Warnings.
Your FERREX® 3.6V Li-Ion Screwdriver has many features that will make your
job faster and easier. Safety, performance, and dependability have been given
Press and hold the power display button (5) for more than 3 seconds.
Using the LED light (2)
To turn on the LED light (2), simply press either end of forward / reverse
operation button (3). When you release the button, the LED light (2) will
turn o.
LED lighting (2) increases visibility for dark or enclosed area.
To Next Page
Loading...
Need help?
General
