tion between noise emissions and existing background
noise, it is not possible to reliably deduct whether addi-
tional precautionary measures are required or not.
Factors that could affect the respective immission level
present at the workplace involve the specification of the
work area, the surrounding area, the duration of expo-
sure, other noise sources etc.
Vibration
Screwing a
h
: 0.330 m/s²
Uncertainty K: 1.5 m/s²
ATTENTION!
The aforementioned vibration emission level (vibration
value) has been measured in accordance with a test
method standardised in DIN EN 62841-2-2 and can be
used to compare one power tool to another. It is also
suited for preliminary estimation of exposure to vibra-
tion. The vibration emission value during actual use
of the tool can differ from the declared vibration level
depending on the way in which the tool is used, for
example:
• Condition of the screwdriver or proper maintenance;
• Type of material and use of the screwdriver;
35
Noise/vibration information
FX-5902183-5902184-Bedien-2002.indd 35FX-5902183-5902184-Bedien-2002.indd 35 18.05.20 15:4518.05.20 15:45
To Next Page
Loading...
