Switching on/off
1. Ensure the start lever is released.
2. Press the lock-off button and hold it in position (See Fig N).
3. Squeeze the start lever towards the handle to switch the
product on (See Fig O). Hold the start lever in position during
operation.
4. Release the lock-off button once the product is running.
5. Release the start lever to switch the product off.
NOTE! The product can only be started by pressing the lock-off
button first followed by squeezing the start lever .
Reverse operation will not start the product.
NOTE! The cutting device will continue to rotate for a short period
after the product has been switched off.
Mowing
1. Never cut off more than one-third of the total length of the
grass for a healthy lawn. In the autumn, lawns should only be
cut as long as there is growth.
2. Slowly push the product forward.
3. Mow in slightly overlapping rows. The most effective pattern
for mowing lawns is straight lines along one of the sides. This
will keep the rows even and ensures that all the lawn is cut
To Next Page
Loading...
Need help?
General
