Repair
This product does not contain any parts that can be repaired
by the consumer other than those covered in the Maintenance
section. Contact an authorised service centre or a similarly
qualified person to have it checked and repaired.
Transportation
1. Switch the product off and disconnect from the power
supply before transporting it anywhere.
2. Adjust the cutting height to the highest position as
described above.
3. Attach transportation guards, if applicable.
4. Always transport the product by its handle. When lifting the
product use the transportation handle as an aid.
5. Protect the product from any heavy impact or strong
vibrations which may occur during transportation in
vehicles.
6. Secure the product to prevent it from slipping or falling over.
To Next Page
Loading...
