ALDI MD 43386 - Using the Alarm; Setting the Alarm; Stopping the Alarm;Activating the Snooze Function; Switching Off the Alarm

Using the alarm
23
Using the alarm
It is possible to set two alarms at different times. The alarm will either trigger an alarm
tone or switch on the radio. You can also set the alarm so that it is activated daily or
only on certain days.
Setting the alarm
− Switch the device to standby mode and press the AL.1 or AL. 2 button. The hour
display fl ashes.
− Press the  or  buttons to set the hour.
− Confi rm by pressing the AL.1 or AL. 2 button.
− The minute display fl ashes. Press the  or  buttons to set the minutes.
− Confi rm by pressing the AL.1 or AL. 2 button.
− Select the frequency of the alarm (17 = daily, 15 = weekdays,
67 = weekends)
− Confi rm by pressing the AL.1 or AL. 2 button.
− The volume display fl ashes. Press the  or  buttons to adjust the volume.
− Confi rm by pressing the AL.1 or AL. 2 button.
− Select the type of alarm: RAD = wake up by radio, BUZ = wake up by alarm.
− Confi rm by pressing the AL.1 or AL. 2 button.
If the alarm is activated, the display shows AL 1 or AL 2.
Stopping the alarm/activating the snooze function
− When the alarm sounds, you can stop it immediately by pressing the button
− or start the snooze function by pressing the SNOOZE controller. The display
shows an arrow fl ashing above the alarm to be repeated. The alarm will then
sound again after approx. 9 minutes (up to a maximum of 59 minutes).
− The snooze function can be cancelled by switching on the device by pressing .
Switching off the alarm
− Switch the device to standby mode and press the AL.1 or AL. 2 button to switch
off the alarm. AL 1 or AL 2 is no longer shown on the display.
IMA 43386 Content V2.2.indd 23IMA 43386 Content V2.2.indd 23 04.06.2021 10:45:5604.06.2021 10:45:56