Heart Rate Monitor Main functional modes
AFTER SALES SUPPORT service@produktservice.info / www.produktservice.info 1-800-493-9137
9
In Profi mode, there are five main function modes available, which are described in
more detail in the following chapters:
- Time mode
- Heart rate mode
- Stopwatch mode
- Countdown mode
- Alarm mode
Press the “MODE” key, in order to switch between the different modes. The individual
modes are described in point 5.2 to point 5.6
Please note that all of the modes and functions described below are only
available in Profi mode, as described in the information box at the beginning of
this point.
Time mode 5.2
Press the “MODE” key repeatedly until you are in the time mode (displayed by “ZEIT”
/ “TIME”).
In time mode, the day of the week and date are shown in the top display segment,
the hours and minutes in the middle section and the seconds in the bottom section.
Press the “SEL” key in order to change the display in the top segment from “day of
the week and date” to “month and year”. After 5 seconds – or when you press the
“SEL” key – the display returns to the “day of week and date” view again.
Set time
• Keep the “SET” key pressed for approx. 3 seconds. Use the “SEL” key to select
between the 12-hour and 24-hour display. Confirm your selection with the “SET”
key, the hours will flash.
• Set the hours with the “SEL” key and confirm with the “SET” key, the minutes will
flash.
• Set the minutes with the “SEL” key and confirm with the “SET” key, the seconds
will flash.
To Next Page
Loading...
Need help?
General
