ALDI Workzone DC-180E-1 User Manual

18V Rotary Grinder
AFTER SALES SUPPORT
(toll free) MODEL No.: DC-180E-1 • 07/2019 10367
e-mail: info.aldi@positecgroup.com
AUS
27
1300 889 028
AUS
FAQ/Troubleshooting
Problem Cause Remedy
The machine does
not work.
The on/off switch is
in “I” position.
The adapter is not
correctly plugged
into a socket.
The socket is
defective.
Press the on/off switch
to “O” position.
Re-plug the adapter
into the socket.
Try another socket.
The machine stops
during use.
The tool is blunt.
The tool used is
not suitable for the
workpiece.
Apply too much
pressure during use.
Replace a tool.
Change a tool.
Move the machine
with moderate, even
pressure.
The machine slips
away.
The tool is not
correctly installed.
Re-install the tool.
For further inquiries or issues associated with your tool, call our
Customer Service on 1300 889 028 or email us at
info.aldi@positecgroup.com

ALDI Workzone DC-180E-1 Specifications

General

Brand	ALDI
Model	Workzone DC-180E-1
Category	Power Tool
Language	English