ALDI Workzone DC-180E-1 User Manual

18V Rotary Grinder
AFTER SALES SUPPORT
(toll free) MODEL No.: DC-180E-1 • 07/2019 10367
e-mail: info.aldi@positecgroup.com
AUS
19
1300 889 028
AUS
Operation
WARNING:
● After connecting the adapter with the machine, make sure
the on/off switch is in the “O” position before connecting the
adapter to the power supply.
● Never press the locking button of the tool holder during use!
It may only be pressed when changing the tool!
● The tool holder may still rotate even after the machine is
switched off. Allow the tool holder to stop by itself. Do not
press the spindle lock button to force it to stop.
Switching on and off (see fig. D)
1) Connect the adapter with this machine, and then connect to a
proper power supply.
2) To start the tool, press the on/off switch (6) to “I” position. To stop,
press the on/off switch (6) to “O” position.
Using the mini drill
WARNING:
● Make sure the on/off switch is in “O” position first before
you connect the plug of the adapter to the socket.
NOTE:
● Always test the respective grinding and engraving tool first on a
D

ALDI Workzone DC-180E-1 Specifications

General

Brand	ALDI
Model	Workzone DC-180E-1
Category	Power Tool
Language	English