Alecto ADI-250 - Automatic Snapshot; Key Tone; Time and Date

-63-
7.3 Time and date:
The photo of the visitor also shows the time and date. You may set the time and
date here:
1. with the indoor unit on stand-by, rst briey press the
button to wake up the
indoor unit
2. press the
MENU soft-button
3. use the and buttons to select the Date & Time function
4. press the
Select soft-button
5. press the and buttons to switch between hours, minutes, day and date and
use the
and buttons to change the settings
6. press 2x the
BACK soft-button to save your settings and to leave the menu
7.4 Key tone:
Each time you press a button, a key tone will be emitted. You may enable or dis-
able this key tone:
1. with the indoor unit on stand-by, rst briey press the button to wake up the
indoor unit
2. press the
MENU soft-button
3. use the
and buttons to select the Key tone function
4. press the
Select soft-button
5. use the
and buttons to select whether you want to switch the key tone On
or Off
6. press the
Select soft-button to save your setting and press the BACK
button to leave the menu
7.5 Automatic snapshot:
Of each visitor pressing the doorbell a photo is taken automatically. You may dis-
able or enable this function or set it to 1 photo/press, 2 photos/press or 3 photos/
press:
1. with the indoor unit on stand-by, rst briey press the
button to wake up the
indoor unit
2. press the
MENU soft-button
3. use the
and buttons to select the Auto. snap set function.
4. press the
Select soft-button
5. use the
and buttons to set the automatic snapshot to On or Off
6. press the
Select soft-button to save your setting and press the BACK
button to leave the menu