To Next Page

To Previous Page

ADDITIONAL FEATURES AND SETTINGS

CHANGE SEND / RECEIVE CHANNEL:

Baby unit:

1. Push 1x on the

button, after the channel indicator light [CH] comes on

2. Push on the button or to select a new channel (1-8)

3. Push on the button

to set the new channel

Parent unit:

1. Push 1x on the button ; the channel display will start ashing

2. Push on the button or to select a new channel (1-8)

3. Push on the button

PTT

to set the new channel

CHANGE SUB CHANNELS (CTCSS):

Baby unit:

1. Push 2x on the button

; the sub channels will show up in large with

the letters [Ct] behind.

2. Use the buttons or to select or disable the sub-channel (1-38) or to

enable or disable this feature by setting sub-channel to 00.

3. Push on the

button to set the selected sub-channel.

Parent unit:

1. Push 2x on the button; the sub-channel indicator will begin to ash.

2. Use the buttons or to select or disable the sub-channel (1-38) or to

enable or disable this feature by setting sub channel to 00.

3. Push the

PTT

button to set the selected sub-channel

ENSURE THAT THE PARENT UNIT

AND BABY UNIT ARE ON THE

SAME CHANNEL AND THAT THE

SAME SUB-CHANNELS ARE

SELECTED.

ALSO SEE PAGE 10, CHAPTER

ENTITLED ‘BABY MULTIPLE

UNITS’.

Explanation of the CTCSS code:

Continuous Tone Controlled

Squelch System is the tone code

that is sent when transmitting. This

code is not an audible tone.

Only when the tone code from the

baby unit corresponds to the tone

code from the parent unit, will the

parent unit display the signal. This

prevents the baby monitor from

interference from other devices

that may communicate on the

same channel.

Brand	Alecto
Model	DBX-92
Category	Baby Monitor
Language	English

Alecto DBX-92 User Manual

Table of Contents

Questions and Answers:

Alecto DBX-92 Specifications

Related product manuals