Alecto WS5200 - Page 92

92
Problem
Solution
5. Check your router firewall settings. The console
sends data via Port 80.
No Wi-Fi connection
1. Check for Wi-Fi symbol on the display. If
wireless connectivity is successful the Wi-Fi
icon will be displayed in the time field.
2. Make sure your modem Wi-Fi settings are
correct (network name, and password).
3. The console only supports and connects to 2. 4
GHz routers. If you own a 5 GHz router, and it is
a dual band router, make sure the 2. 4GHz router
is enabled.
4. The console does not support guest networks.