89
• View sensor ID, signal strength and battery power condition. 1-4
bars means 1-4 successful successive signal receptions without
missed ones.
• Register the sensor when offline.
• Enable or disable the sensor.
• Input the Sensor ID when offline.
9 Maintenance
The following steps should be taken for proper maintenance of your
station
1. Clean the rain gauge once every 3 months. Rotate the funnel
counter-clockwise and lift to expose the rain gauge mechanism, and
clean with a damp cloth. Remove any dirt, debris and insects. If bug
infestation is an issue, spray the array lightly with insecticide.
To Next Page
Loading...
