Aleratec 260155 - Underrun Protect

www.aleratec.com
42
Using the DVD/CD Duplicator
Main Menu
Advanced Setup - continued
12.01 UnderRun Protect
This setting turns Buffer Under Run Protection (also known as “Burn Proof”,
“SafeBurn”, “JustLink”, “Seamless Link”, etc.) on or off.
Default setting is “On”; press the 1. ENT button to change, or ESC to exit.
12.02 Overburn
This function will allow you to burn a few MB more than the standard capacity
of the target Audio CD (e.g. 75 minutes of recording time vs. 74 minutes).
You can activate the overburn function of the DVD/CD-Recorder through this
setting.
Default setting is “Off”; press the 1. ENT button to change, or ESC to exit.
UnderRun Protect
On


ESCENT
12-01. Adv Setup
UnderRun Protect


ESCENT
Overburn
Off


ESCENT
12-02. Adv Setup
Overburn


ESCENT