20 Alere Cholestech LDX
®
System User Manual
10. When the test is complete, the analyzer will beep, and the
screen will display:
[Test Name]=###
11. Press DATA to view the additional results.
12. When the results are outside the measuring range of the
test, the screen will display:
[Test Name]<###
or
[Test Name]>###
13. If there is a problem with the test, a message will appear on the
screen. (See the Troubleshooting & Maintenance section, pages
36–41, for further instructions.)
14. When the drawer opens, remove the cassette, and put
it in a biohazardous waste container. Leave the analyzer
drawer empty when not in use.
15. Record the results on the appropriate form.
16. To run another test cassette, press RUN once.
Load cassette
and press RUN....(X)
17. Repeat step 3, and steps 6 through 15.
To Next Page
Loading...
