Installation and Operations Guide
|
Maintaining an AZW-5000
© Honeywell LTBT-TM-AZWIOG Rev. 0001BETA
21
Viewing commissioning data
You may need to view commissioning data after initial commissioning.
To view settings for a commissioned AZW-5000
1. If the device is not listed in the Device Manager table, perform a device
scan and add the device to the table.
2. Open your commissioning data display in Edit mode.
3. Select the commissioning button.
4. Right-click the commissioning pushbutton and select Repeat item.
5. Accept the defaults and click Do it.
6. Double-click the new button.
7. Change the text for the button label to a unique name (device instance,
for example).
8. Type the Device instance of the device you want to view.
9. Click Close and then exit Edit mode.
10. Click the new button.
To Next Page
Loading...
Need help?
General
